波浪荷载作用下海上新型潜式浮式风力机运动特性研究

以适用于中等水深(50~200 m)的新型潜式浮式风力机为研究对象,该风力机基础综合Spar式、半潜式及张力腿(TLP)3类浮式风力机基础的优点,运行时基础主体淹没在水下,具有较小的水线面(如同Spar平台),受波浪影响较小;平台通过张紧式系泊线与海床相连(如同TLP平台),具有良好的垂荡和摇摆运动特性;拖航状态下,浮式平台处于半潜状态,水线面面积大(如同半潜式平台),具有良好的浮稳性。通过分析不同波况下的潜式浮式风力机耦合动力响应得到潜式浮式基础的横荡、纵荡、垂荡及纵摇运动响应,以及发电功率、叶片根部弯矩、塔筒顶部和底部弯矩、锚链张力时程曲线。研究结果表明:波浪对于结构的纵摇运动的影响最为明显,对发电功率、叶片根部弯矩和塔筒顶部弯矩影响较小,对塔筒底部弯矩和系泊线张力影响较大。     

Power flow calculation for a distribution system with multi-port PETs: an improved AC-DC decoupling iterative method

Recently, power electronic transformers (PETs) have received widespread attention owing to their flexible networking, diverse operating modes, and abundant control objects. In this study, we established a steady-state model of PETs and applied it to the power flow calculation of AC–DC hybrid systems with PETs, considering the topology, power balance, loss, and control characteristics of multi-port PETs. To address new problems caused by the introduction of the PET port and control equations to the power flow calculation, this study proposes an iterative method of AC–DC mixed power flow decoupling based on step optimization, which can achieve AC–DC decoupling and effectively improve convergence. The results show that the proposed algorithm improves the iterative method and overcomes the overcorrection and initial value sensitivity problems of conventional iterative algorithms.     

Chicken breast quality – normal,pale, soft and exudative (PSE) and woody – influences the functional properties of meat batters

Three classes (normal, PSE‐like and woody, thirty for per class) of fresh chicken breast meats were selected from a Chinese processing plant. Then, three classes of chicken breast meats were used to prepare meat batters and meatballs. This study investigated the effects of three classes of chicken breast meat on the physicochemical properties, water distribution, protein secondary structures and microstructures of meatballs. PSE‐like and woody meatballs both had lower water holding capacity and textural properties than normal meatballs. Furthermore, the free water mobility and proportion in PSE‐like and woody meatballs were increased (P < 0.05). According to near‐infrared spectroscopy results, the intensity of the 1940‐nm bands of PSE‐like and woody classes both increased. Both PSE‐like and woody meatballs formed more aggregated gel matrices than normal class. PSE‐like and woody classes had higher α‐helix and lower β‐structure contents (P < 0.05). Overall, compared with normal meatballs, PSE‐like and woody meatballs showed inferior functional properties.     

5G基站供配电勘察设计思路的调整分析

针对5G基站设备相对于以往2G/3G/4G设备的变化,面向一线勘察设计人员,阐述5G基站在供配电需求方面功耗增大、供电方式多样化、供配电改造工作量和难度加大等相应变化,归纳相应的勘察前期准备工作要点,分析在实际工作中可能面临的外市电引入改造、供电方式选择的多样性、新型锂电池应用等重点、难点,介绍理想的5G供配电模式及发展方向,最后提出5G基站供配电勘察设计工作思路调整的建议。     

配电线路绝缘包裹机器人研制

在介绍国内外输电线路现有机器人研究基础上，针对配电线路绝缘修复领域短板，开发了一套能够在线修复配电线路绝缘皮损伤的包裹机器人。首先，对绝缘包裹机器人的机械结构进行了设计研究，包括行走装置、升降装置和柔性输送与包裹装置；然后，开发了相应的控制系统，包括无线通讯、视觉系统等，并对其进行了抗干扰试验和耐压试验，试验结果合格；最后，通过现场绝缘包裹测试完成了机器人的功能性与可靠性验证。本项目所研发的机器人突破了在线修复、柔性包裹等技术瓶颈，解决了人工修复带来的一系列问题。样机通过现场带电包裹试验，绝缘包裹效果符合行业标准要求，达到了预期效果。     

台阶式泄洪槽水工模型试验研究

为验证山西省某森林公园台阶式消能泄洪槽设计的合理性,通过模型试验研究了该消能泄洪槽不同流量工况下的流态、台阶平面压力、流速分布及消能效率。结果表明,在试验流量范围内,泄槽内为跌落水流和过渡水流,掺气不明显;台阶平面压力变化范围为-9.7~24.4kPa,当流量为6m^3/s时,出现最大负压9.702kPa;除#3消力池进口处外,三段台阶式消能段均为泄槽底部流速较小,对泄槽底部冲刷较小,泄槽水流表面流速最大;在不同流量下台阶式泄槽+消力池联合消能率均超过了90%,其中大部分能量消散在溢洪道台阶上。研究成果可为类似工程提供参考。     

Numerical electric field analysis of capacitance and potential in space for estimation of permittivity distribution

We have been studying on measuring capacitance and potential using long‐distance electrode for estimating a permittivity distribution. The estimating method of permittivity distribution was proposed using finite element method (FEM) and genetic algorithm. However, the measurement accuracy was not reviewed. In this paper, we carried out numerical analysis using FEM in case of change of diameter, position, and permittivity of a rod of dielectric and discussed the measurement accuracy of capacitance and potential.     

Study on a high frequency pulse tube cryocooler capable of achieving temperatures below 4 K by helium-4

High-frequency pulse tube cryocooler (HPTC) has advantages of compact structure, low vibration, high reliability and long operation time. In this study, Theoretical analysis and experimental tests have been conducted in four aspects based on a developed 4 K HPTC. Firstly, a compressor with larger power output capability was employed and the impedance match between the cold head and the compressor was discussed. Secondly, simply using inertance tube configuration to replace the traditional inertance tube-gas reservoir structure. Then, the type and the size of the regenerator materials working at 4–20 K have been experimentally optimized. Finally, the performance of double-inlet working at as low as 20 K has also been tested for the first time for the HPTC. The present prototype achieved a no-load temperature of 3.6 K, which is the lowest temperature record ever reported for HPTC using helium-4 as working gas. A cooling power of 6 mW/4.2 K was also obtained with 250 W input power and a precooling power of 12.1 W/77 K.     

25CrNi2MoV钢的微动磨损性能

采用微动摩擦磨损试验机在干摩擦条件下对新型高速重载传动轴用25CrNi2MoV钢进行微动磨损试验,研究了不同载荷(50~200N)和频率(15~30Hz)下该钢的微动磨损性能。结果表明:在频率为20Hz条件下,当载荷由50N增至200N时,25CrNi2MoV钢的平均摩擦因数由0.766减至0.661,磨损体积由19.65×10^-3 mm^3增至75.83×10^-3 mm^3;在载荷为30N条件下,当频率由15Hz增至30Hz时,平均摩擦因数由0.790增至0.905,磨损体积由11.43×10^-3 mm^3增至23.88×10^-3 mm^3;在不同试验参数下,25CrNi2MoV钢磨损表面均出现了氧化和犁沟现象,磨损机制包含氧化磨损和磨粒磨损;在频率为20Hz条件下,载荷为50,100N时,25CrNi2MoV钢的磨损机制以黏着磨损为主,载荷为150,200N时,主要磨损机制为疲劳磨损;在载荷为30N条件下,频率为15~25Hz时,磨损机制以磨粒磨损为主,当频率增至30Hz时,磨损机制以疲劳磨损为主。     

铸造式和焊接式主轴箱体的动态特性对比分析

利用有限元法和试验模态法对立式加工中心的铸造式和焊接式两种结构的主轴箱体进行了模态分析,分别获得了其前六阶固有频率和振型。通过对比两种方法获得的结果,验证了有限元分析模型的有效性。研究表明,两种主轴箱体的阻尼比接近,但焊接式主轴箱体的各阶固有频率均要高于铸造式主轴箱体的各阶固有频率。并且铸造式主轴箱体的固有频率更接近于机床主轴的常用工作频率,焊接式主轴箱体的则远离此频率。因此对于常用主轴转速而言,焊接式主轴箱体的动态性能要优于铸造式主轴箱体的动态性能。